Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Trusted Commercial Locksmith for Long Beach Businesses
A commercial locksmith in Long Beach typically costs $150-$600 depending on the service, with most routine jobs completed same-day and emergency lockouts responded to within 30-45 minutes. Novak Lock & Security Long Beach has installed, repaired, or rekeyed over 60,000 locks and access systems since 2002, every one starting with a written price and ending with a documented photo record. We’re independently owned and operated under The Haven Standard, and our dispatchers answer calls live at (424) 340-6795, 24 hours a day.
Long Beach’s commercial corridors, from the retail strips along Atlantic Avenue to the industrial parks near the port and the office buildings downtown, present a wide range of security hardware. We’ve found that many businesses here operate with locks that were installed when the building was constructed, sometimes decades ago, with no documentation of who holds keys. Our technicians carry the tools and inventory to service everything from a 1970s mortise lock in a Signal Hill-adjacent warehouse to a modern Mul-T-Lock high-security cylinder in a new development near Bixby Knolls.
Daniel Novak established this operation with a single rule that still governs every job: the price quoted on the phone is the price on the invoice. Haven Standard Clause 1 prohibits any technician from changing that price at the door. We’ve built our reputation in Long Beach on that rule, not on urgency tactics or decorative badges.
What Our Commercial Locksmith Service Includes
Commercial Lockout
A commercial lockout occurs when a business owner, manager, or employee cannot access a building, office, storage room, or other secured area due to a lost, broken, or malfunctioning key or lock. In Long Beach, we respond to these calls from restaurants on Second Street at closing time, from warehouses near the port at 5 a.m., and from medical offices in the Cal Heights area during business hours. Our technician arrives with picks, bypass tools, and replacement cylinders, and if the lock must be drilled to gain entry, we carry the correct replacement hardware to secure the door before we leave, with the full cost stated in writing before any work begins.
Master Key System
A master key system is a hierarchy of keys that allows different levels of access, typically one master key that opens all locks and sub-master keys that open specific groups. We design these systems for Long Beach property managers who need maintenance staff to access common areas but not individual tenant spaces, and for businesses with multiple departments requiring graduated security levels. Our process includes a written key chart showing which key opens which lock, with every cylinder pinned to specification and a copy of the chart left with the facility manager. We also service and expand existing master key systems, even those installed by other locksmiths, and can rekey the entire hierarchy when staff changes.
High Security Locks
High-security cylinders are locks that cannot be picked or bumped by standard tools, typically featuring restricted keyways, hardened drill-resistant inserts, and patented key control that prevents unauthorized duplication. In Long Beach, we install Mul-T-Lock, Abloy, and Schlage Primus systems for businesses handling sensitive records, controlled substances, or high-value inventory. Our technicians are factory-authorized on these brands, meaning we stock OEM parts and can generate new keys from factory codes rather than replacing entire cylinders when keys are lost. We also perform security audits on existing hardware, identifying where entry-grade locks create vulnerability gaps in an otherwise protected facility.
Panic Bar Installation
Panic bars, also called crash bars or exit devices, are the horizontal push bars required by fire code on commercial exit doors, designed to allow rapid egress without key operation. Long Beach businesses in older buildings, particularly those converted from residential use in neighborhoods like Alamitos Beach, often lack properly installed panic bars or have devices that no longer meet current ADA or fire code requirements. We install new panic bars, replace worn mechanisms that stick or fail to latch, and retrofit existing doors to accept the correct device for the door’s width, material, and traffic load. Every installation includes verification of proper latching and a written record of the device model and installation date.
Access Control
Access control systems replace or supplement mechanical keys with electronic credentials, including keycard readers, keypad entry, biometric scanners, and smartphone-based authentication. For Long Beach businesses, we install standalone keypad locks on single doors, networked systems covering multiple entry points with audit trails, and cloud-managed platforms that allow remote credential management. Our technicians run the low-voltage wiring, program the control panels, and train designated staff on adding or removing users. We also maintain and repair existing systems, including troubleshooting failed readers, replacing damaged wiring, and upgrading firmware.
File Cabinet Lock
File cabinet locks secure documents, media, and small valuables in office storage, with common types including keyed cam locks, plunger locks, and electronic locks with audit capability. We encounter many Long Beach businesses with file cabinets that were purchased without locks, with broken locks that no longer secure the drawer, or with locks for which no key exists and no replacement core is available. Our technicians carry replacement cam locks in multiple finishes and keying options, can master-key file cabinet locks to match an office’s existing key system, and install electronic locks where document access tracking is required.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Commercial Locksmith
We’ve serviced hundreds of Schlage commercial-grade levers and deadbolts in Long Beach office buildings, and we stock their B-series and ND-series parts for same-day repair. Our technicians are also factory-authorized on Mul-T-Lock high-security cylinders, which we install for businesses in the medical corridor near Long Beach Memorial and for attorneys’ offices downtown where key control is critical. We carry Sargent mortise lock components for the heavy-duty applications common in schools and municipal buildings, and we’ve rebuilt Abloy Protec2 systems for industrial clients near the port who require the highest level of pick and drill resistance available.
Whether you have Schlage, Mul-T-Lock, Sargent, Abloy, or any other make of commercial lock, we can help. Our inventory includes replacement cylinders, latch mechanisms, exit device parts, and electronic components for most major brands, and what we don’t stock we can typically source within 24 hours through our distributor relationships.
Signs You Need Commercial Locksmith Right Now
- A key breaks off in the lock or turns without retracting the latch. This indicates internal wear or damage to the cam or tailpiece, and continuing to force the key can push the broken fragment deeper, converting a simple extraction into a full lock replacement. We’ve extracted broken keys and restored function in Long Beach businesses from the East Village Arts District to the traffic circle area.
- You cannot account for all copies of a key, or a former employee never returned theirs. Every unaccounted key is a potential unauthorized entry, and rekeying the cylinder is the only way to be certain no copies remain in circulation. We rekey commercial locks throughout Long Beach, typically completing the job in under an hour with no hardware replacement needed.
- The panic bar sticks, rattles, or requires excessive force to operate. A malfunctioning exit device is a life safety hazard and a code violation, and liability falls on the building owner if someone is injured during an emergency. We inspect, lubricate, repair, or replace panic bars to restore smooth operation and code compliance.
- Your access control system shows offline readers, failed credentials, or gaps in the audit log. These symptoms indicate wiring degradation, reader failure, or database corruption, any of which can leave doors unsecured or lock out authorized users. Our technicians diagnose the fault at the panel, the reader, or the network connection and restore full function with documented testing.
- The lock cylinder rotates loosely or the keyway feels gritty. Internal springs and pins wear with use, and dirt or corrosion accelerates the failure; a cylinder in this condition will eventually seize completely, typically at the worst possible time. We can rebuild or replace the cylinder before total failure, with the work scheduled at your convenience rather than as an emergency.
Our Commercial Locksmith Process - Step by Step
- 1
Call and receive a written price. When you call (424) 340-6795, a live dispatcher answers, asks the specific questions needed to scope the job, and quotes a firm price that the technician is contractually prohibited from changing. Haven Standard Clause 1 applies to every call, with no exceptions.
- 2
Technician arrival and identification. Our technician arrives in a marked vehicle, in uniform, and presents identification. Before touching any lock, they confirm the scope of work and the price with you, and they photograph the existing hardware condition for the documented photo record that you receive at job completion.
- 3
Diagnosis and explanation. The technician identifies the specific fault, the grade and condition of the existing hardware, and any security gaps. They explain what they found in plain terms, name the part if replacement is needed, and confirm the final price before proceeding.
- 4
Execution and testing. The work is performed, whether that’s key extraction, rekeying, lock replacement, panic bar installation, or access control programming. Every function is tested multiple times, and in the case of master key systems or access control, the technician verifies every key and every credential against the written chart or user list.
- 5
Documentation and warranty. You receive a written invoice showing the exact work performed, the parts used, the final price matching the phone quote, and the documented photo record. The 365-Day Done Right Promise covers all labor and materials, and the technician’s notes are archived for future reference if you call again.
How Much Does Commercial Locksmith Cost in Long Beach?
A typical commercial lockout in Long Beach runs $150-$250 during standard hours and $200-$350 after hours, depending on the lock type and whether drilling is required. For a detailed Commercial Locksmith cost guide, see our pricing breakdown. Commercial rekeying typically costs $25-$45 per cylinder, with a minimum service charge that covers travel and the first hour. Master key system design and installation starts around $400 for a small office with 5-10 locks and increases with the complexity of the key hierarchy. High-security lock installation, including Mul-T-Lock or Abloy cylinders, ranges from $180-$340 per door depending on the hardware grade and whether the door requires modification. Panic bar installation typically runs $350-$650 per door, including the device, labor, and code-compliance verification. Access control system pricing varies widely, from $800-$1,500 for a standalone keypad entry to $3,000-$8,000 for a multi-door networked system with software management.
Several factors affect the final price: the grade and condition of existing hardware, whether the door is metal, wood, or aluminum, the need for after-hours or emergency response, and the complexity of keying or programming requirements. We avoid overcharging by quoting the complete job on the phone, not a low “trip charge” that balloons with add-ons. Our free estimate includes a full scope of work with no obligation, and we offer a free second opinion on any written estimate from another locksmith. Haven Standard Clause 1 is the protection: the price you approve is the price on the invoice, with no call-out surcharge added on arrival.
Commercial Locksmith Near Long Beach - Our Service Area
We serve businesses throughout Long Beach and the surrounding cities, including Commercial Locksmith in Bellflower, Commercial Locksmith in Carson, Compton, Norwalk, Downey, Buena Park, San Pedro, Gardena, Torrance, Garden Grove, and Huntington Beach. Typical response time in central Long Beach is 25-35 minutes during business hours, with slightly longer times to the outer edges of our service area during peak traffic periods on the 405 or 710 corridors.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Commercial Locksmith in Long Beach
A commercial locksmith specializes in the locks, access systems, and security hardware used in business environments, including offices, retail spaces, warehouses, and institutional buildings. Unlike residential locksmiths who primarily service home-grade deadbolts and knob sets, commercial locksmiths work with mortise locks, master key systems, panic bars, access control networks, and high-security cylinders designed for higher traffic and stricter code requirements. Novak Lock & Security Long Beach provides the full range of commercial services, from emergency lockout response to planned security upgrades, with every job starting at a written price.
A standard commercial lockout takes 15-30 minutes to resolve, a rekeying job takes 30-60 minutes depending on the number of cylinders, and a master key system installation typically requires 2-4 hours for a small to medium office. Panic bar installation and access control system deployment take longer, usually a half-day to a full day, because they involve door modification, wiring, and code-compliance testing. We schedule surveyed jobs at your preferred time and arrive for emergency calls with the tools and inventory to complete the work in a single visit.
The exact cost depends on the specific service, the hardware involved, and the condition of your existing locks, which is why we quote firm, itemized prices on the phone before dispatching a technician. For reference, most routine commercial rekeys in Long Beach fall in the $150-$300 range total, lock replacements run $180-$340 per door, and emergency lockouts are $150-$350 depending on timing and complexity. Call (424) 340-6795 for an exact quote based on your specific situation, estimates are free, and Haven Standard Clause 1 guarantees the quoted price is the final price.
Yes, we service and install Schlage commercial-grade hardware including the B-series deadbolts, ND-series cylindrical levers, and L-series mortise locks, and we stock common replacement parts for same-day repair. Our technicians also work with Schlage’s high-security Primus and Primus XP cylinders for businesses that require restricted key control. Whether you need a simple lever repair or a full upgrade to a Primus system with patented key duplication protection, we quote the scope and price in writing before starting.
Yes, our dispatchers answer calls live 24 hours a day, 7 days a week, with no voicemail queue or callback window, and we maintain emergency response capability for lockouts, break-in damage, and failed access control systems. After-hours calls are priced higher than standard hours, but the dispatcher states the complete price on the phone, and the technician cannot change it. We’ve responded to overnight emergencies at Long Beach hotels, early-morning calls at port-adjacent warehouses, and weekend lockouts at downtown restaurants.
Every lock installation, rekey, and repair is backed by our 365-Day Done Right Promise, if it’s not done right, we make it right, with no charge for return visits to correct our own work. This applies to labor and materials, and the promise is documented on every invoice. For factory-authorized brands like Mul-T-Lock and Abloy, the manufacturer’s warranty also applies in addition to our own guarantee.
Gather any existing keys, access cards, or system documentation you have, and identify which doors or locks need service, including any known history of previous work. If you’re the tenant rather than the property owner, confirm that you have authority to authorize lock changes, particularly for master key systems or access control modifications. For master key or access control projects, it helps to have a list of who needs access to which areas, but we can also walk through this with you during the service call. You may also want to review our Commercial Locksmith Maintenance Checklist for Long Beach Homeowners to prepare. Call (424) 340-6795 to schedule, and we’ll confirm what to have ready when we quote the job.
Schedule Your Commercial Locksmith Service in Long Beach Today
Call (424) 340-6795 to speak with a live dispatcher, receive a firm written price, and schedule service at your convenience or request immediate emergency response. Every job includes a background-checked, uniformed technician, a documented photo record, and the protection of Haven Standard Clause 1, the price on the phone is the price on the invoice. Estimates are free, with no obligation, and we offer a free second opinion on any competitor’s written quote.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Long Beach since 2002.